It is made from the high grade aluminum extrusions that can be recessed, surface mount and pendant installation. The track rail has the invisible conductive copper strip on both sides inside the track. and the lighting circuit is max 15amp for this track rail.

Invisible 48V conductors on both sides.

What installation types of Magnetic track light system?
It is only 3 types of installation method to the magnetic track light: recessed, surface mount and suspension. Regarding the recessed installation, you should check it first if the ceiling or wall is the Plasterboard, and there is the space to insert the height of the track.

Different light fixture can be available for the magnetic track light system: spots, linear, grille and pendants. Each light fixture is designed with the magnetic adapter. It means- can be toolfree positioned and repositioned into the track rail, thanks to their magnetic fixation, making it comfortable for the user to adapt the lighting according to the specific setting of the room. Magnet force connects profile and modules both mechanical and electrical. 

How the light fixture connect in the magnetic track rail?
The adapter is the lamp-holding fixtures. Each has two metal tabs that connect it to the conductive copper strip inside the track. It has a magnet at the bottom of the adapter, such a fixture on the iron bar in the track, Besides, there are two lock devices on the adapter to further secure the luminaire to ensure that it will not fall out of the track. Toolfree positioning, adjusting and focusing of light to meet specific needs of the room with this adapter.

Pre-configured corners complete the system that can run up, around and across walls and ceilings. It helps you expand the system’s application range.

1.We need to prepare a wooden square slot with a width of 34-38mm and a thickness of 12mm.
2.Insert the magnetic track in the direction of the zigzag shape of the iron sheet.
3.The magnetic track and wooden groove are fixed with nails.
4.Install the corner modules.
5.Install the plug and lock it with M3 screws.
6.Cover with gypsum board and fix with nails.
7.Make up putty.
8.Stick anti-cracking net.
9.Brush batch of gray paint.
10.Complete the installation.

1.Fix the position with M4 self-tapping screws.
2.Tighten the tension head clockwise.
3.Insert the positioning screw into the chute block.
4.The chute block is aligned with the rail groove and inserted.
5.Tighten the fixed thread head clockwise.
6.Complete the installation.